https://bmwwinddeflectors.com Thu, 20 Aug 2026 06:52:49 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2015/ https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2015/#comments Fri, 06 Mar 2026 08:28:44 +0000 https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2015/










Chain and Sprocket Kits. DC / AFAM Chains & Sprockets. Ilmberger GLOSS Carbon Fibre Wind Deflectors Flaps BMW R1200GS LC Adventure 2015. Brand New Genuine Ilmberger Carbon Fibre. Ilmberger Carbon parts are manufactured to the highest standards from 100% real carbon fibre, exclusively using the market-leading pre-impregnated autoclave process. All parts are extensively field and laboratory tested. The attention to detail ensures durability, strength, resistance and fit. This process allows Ilmberger Carbon to manufacture parts to the same level as those supplied to top-level teams in Formula 1 and MotoGP. Each gloss accessory carries a superior clear lacquer coating which provides outstanding depth and finish, alongside exceptional resistance against aging, weathering and UV radiation. Matt parts are further specially buffed to remove the shine, yet retain the same protection. This unique process allows all street parts to be supplied with ABE/TUV approval – this does not extend to racing parts. Ilmberger Carbon parts are market-leading aftermarket carbon products ready to fit to your motorcycle! Precision manufacturing techniques ensure a stunning visual finish, reduced weight, increased strength and exceptional fit! How are Ilmberger Carbon parts made? Ilmberger carbon parts are produced in the autoclave from Prepreg carbon weave. The carbon fibre is processed dry and usually laid in fully milled aluminium moulds, then packed in vacuum bags. In the next step, the parts are kept under constant vacuum within the bag and exposed to additional external pressure while being baked in the autoclave for several hours. In addition, the temperature is raised or lowered several times, depending on which fibres are being treated. Following the heating process, the parts are de-moulded and milled and sharpened in the water jet cutter or the 5 axle milling machine. Then, in the final step, the practically finished carbon parts are covered with a clear plastic coating. What is Prepreg weave? Prepreg weave is a pre-impregnated carbon weave that has been treated with binding agents before processing. Are Ilmberger carbon parts pre-drilled? Ilmberger supply ready-to-assemble carbon parts that are not only pre-drilled but ready to fit. And at Ilmberger Carbonparts we make sure it’s a perfect fit. What advantages do autoclave carbon parts have? Autoclave parts are much more stable than the so-called wet laminate parts. They can be varnished easily on account of their sealed surfaces, during precision processing there are no excess components present, such as, for example, excess resin, making the parts significantly lighter than “standard” carbon parts which are not autoclave baked. Is it legally permissible to fit carbon parts to street vehicles? Yes, for UK customers. Non-UK customers may need to register in the vehicle registration documentation or could obtain an Ilmberger ABE (general operating licence). Is the weight difference noticeable when compared to the plastic parts on a motorcycle? Depending on the amount used and the model of motorcycle in question, it is possible to reduce the overall weight by a number of kilos, and the perceptible difference should not be underestimated. The number of kilos on can reduce automobile weight by is often in the 2-digit range. Which weight advantages does autoclave carbon offer when compared to GRP/GFK? As well as the excellent optics the carbon possesses, cladding made from carbon is much more stable in the event of a crash than GRP/GFK, they do not suffer from wear and tear as much as GFK parts, and they do not break as easily as GFK parts, thereby assuring better protection for the underlying components. Are the parts supplied painted, or with decals? All Ilmberger parts are manufactured as plain carbon fibre. Some pictures shown may include OEM decals, or custom paint. This is only for part illustration purposes. What is the difference between regular gloss or matt road parts and racing parts? Ilmberger manufacture regular “road” parts which are finished to the highest possible standards. They also offer a “race” range – these parts are cheaper for track bikes, but do not meet the same standard of finish as the road parts. Race parts do not have UV protection or as many layers of lacquer, and many are supplied without additional styling cut-outs (EG bellypans). Race parts are NOT TUV approved. In most cases, Ilmberger supply there parts as a direct replacement. These usually reuse the original fittings. However, there are instances where original fittings cannot be reused; Ilmberger will provide these parts. Will these match my Ducati Performance Carbon? All Ilmberger Carbonparts come in matt finish for Ducati models – such as the original Ducati Performance Carbonparts do. They are a perfect match! Is a Gloss part available in the Matt finish (or vice versa)? Ilmberger do not offer both Gloss and Matt finish options for each model, it is usually one or the other. However, where one finish is offered, it is possible to order the other as a “special-order”. There are a few things to be aware of though… This would be “special order” only. This means manufactured specially for you and is non-cancellable or returnable! Lead-times are likely to be in excess of 12 weeks! All “special-order” parts incur a surcharge. Established in 1999, Performance Parts Ltd are the UK’s leading high performance motorcycle component wholesale distribution company. It is not by accident that many top racing teams use the same products that we distribute. All of our products are tough tested and evaluated before they make it into our portfolio. Very often this can mean that there are cheaper alternatives to our brands, but there is usually a very good reason why! We summarise this situation by using the phrase “The quality remains long after the price is forgotten”. Please note that not all products advertised are in stock at all times. Many sell out, and some are manufactured to order. Please note that we will not accept exhaust products for return if the engine has been started with the product fitted. Units 3-4, Broad March. Long March Industrial Estate. Ilmberger GLOSS Carbon Fibre Long Bellypan Engine Spoiler & Kit BMW S1000RR 2017. Ilmberger GLOSS Carbon Fibre Rear Hugger Mudguard Chain Guard BMW S1000XR 2015. Ilmberger BMW S1000RR 2020 Gloss Carbon Fibre Rear Hugger Mudguard & Chain Guard. Ilmberger GLOSS Carbon Fibre Left Right Frame Covers Protectors BMW S1000RR 2017.

]]> https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2015/feed/ 0 https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2016/ https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2016/#comments Sun, 06 Jul 2025 16:25:44 +0000 https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2016/










Chain and Sprocket Kits. DC / AFAM Chains & Sprockets. Ilmberger GLOSS Carbon Fibre Wind Deflectors Flaps BMW R1200GS LC Adventure 2016. Brand New Genuine Ilmberger Carbon Fibre. Ilmberger Carbon parts are manufactured to the highest standards from 100% real carbon fibre, exclusively using the market-leading pre-impregnated autoclave process. All parts are extensively field and laboratory tested. The attention to detail ensures durability, strength, resistance and fit. This process allows Ilmberger Carbon to manufacture parts to the same level as those supplied to top-level teams in Formula 1 and MotoGP. Each gloss accessory carries a superior clear lacquer coating which provides outstanding depth and finish, alongside exceptional resistance against aging, weathering and UV radiation. Matt parts are further specially buffed to remove the shine, yet retain the same protection. This unique process allows all street parts to be supplied with ABE/TUV approval – this does not extend to racing parts. Ilmberger Carbon parts are market-leading aftermarket carbon products ready to fit to your motorcycle! Precision manufacturing techniques ensure a stunning visual finish, reduced weight, increased strength and exceptional fit! How are Ilmberger Carbon parts made? Ilmberger carbon parts are produced in the autoclave from Prepreg carbon weave. The carbon fibre is processed dry and usually laid in fully milled aluminium moulds, then packed in vacuum bags. In the next step, the parts are kept under constant vacuum within the bag and exposed to additional external pressure while being baked in the autoclave for several hours. In addition, the temperature is raised or lowered several times, depending on which fibres are being treated. Following the heating process, the parts are de-moulded and milled and sharpened in the water jet cutter or the 5 axle milling machine. Then, in the final step, the practically finished carbon parts are covered with a clear plastic coating. What is Prepreg weave? Prepreg weave is a pre-impregnated carbon weave that has been treated with binding agents before processing. Are Ilmberger carbon parts pre-drilled? Ilmberger supply ready-to-assemble carbon parts that are not only pre-drilled but ready to fit. And at Ilmberger Carbonparts we make sure it’s a perfect fit. What advantages do autoclave carbon parts have? Autoclave parts are much more stable than the so-called wet laminate parts. They can be varnished easily on account of their sealed surfaces, during precision processing there are no excess components present, such as, for example, excess resin, making the parts significantly lighter than “standard” carbon parts which are not autoclave baked. Is it legally permissible to fit carbon parts to street vehicles? Yes, for UK customers. Non-UK customers may need to register in the vehicle registration documentation or could obtain an Ilmberger ABE (general operating licence). Is the weight difference noticeable when compared to the plastic parts on a motorcycle? Depending on the amount used and the model of motorcycle in question, it is possible to reduce the overall weight by a number of kilos, and the perceptible difference should not be underestimated. The number of kilos on can reduce automobile weight by is often in the 2-digit range. Which weight advantages does autoclave carbon offer when compared to GRP/GFK? As well as the excellent optics the carbon possesses, cladding made from carbon is much more stable in the event of a crash than GRP/GFK, they do not suffer from wear and tear as much as GFK parts, and they do not break as easily as GFK parts, thereby assuring better protection for the underlying components. Are the parts supplied painted, or with decals? All Ilmberger parts are manufactured as plain carbon fibre. Some pictures shown may include OEM decals, or custom paint. This is only for part illustration purposes. What is the difference between regular gloss or matt road parts and racing parts? Ilmberger manufacture regular “road” parts which are finished to the highest possible standards. They also offer a “race” range – these parts are cheaper for track bikes, but do not meet the same standard of finish as the road parts. Race parts do not have UV protection or as many layers of lacquer, and many are supplied without additional styling cut-outs (EG bellypans). Race parts are NOT TUV approved. In most cases, Ilmberger supply there parts as a direct replacement. These usually reuse the original fittings. However, there are instances where original fittings cannot be reused; Ilmberger will provide these parts. Will these match my Ducati Performance Carbon? All Ilmberger Carbonparts come in matt finish for Ducati models – such as the original Ducati Performance Carbonparts do. They are a perfect match! Is a Gloss part available in the Matt finish (or vice versa)? Ilmberger do not offer both Gloss and Matt finish options for each model, it is usually one or the other. However, where one finish is offered, it is possible to order the other as a “special-order”. There are a few things to be aware of though… This would be “special order” only. This means manufactured specially for you and is non-cancellable or returnable! Lead-times are likely to be in excess of 12 weeks! All “special-order” parts incur a surcharge. Established in 1999, Performance Parts Ltd are the UK’s leading high performance motorcycle component wholesale distribution company. It is not by accident that many top racing teams use the same products that we distribute. All of our products are tough tested and evaluated before they make it into our portfolio. Very often this can mean that there are cheaper alternatives to our brands, but there is usually a very good reason why! We summarise this situation by using the phrase “The quality remains long after the price is forgotten”. Please note that not all products advertised are in stock at all times. Many sell out, and some are manufactured to order. Please note that we will not accept exhaust products for return if the engine has been started with the product fitted. Units 3-4, Broad March. Long March Industrial Estate. Ilmberger GLOSS Carbon Fibre Long Bellypan Engine Spoiler & Kit BMW S1000RR 2017. Ilmberger GLOSS Carbon Fibre Rear Hugger Mudguard Chain Guard BMW S1000XR 2015. Ilmberger BMW S1000RR 2020 Gloss Carbon Fibre Rear Hugger Mudguard & Chain Guard. Ilmberger GLOSS Carbon Fibre Left Right Frame Covers Protectors BMW S1000RR 2017.

]]> https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2016/feed/ 0 https://bmwwinddeflectors.com/vlog-25-wind-flaps-crack-heads-the-humphrey-bogart-of-motorcycles/ https://bmwwinddeflectors.com/vlog-25-wind-flaps-crack-heads-the-humphrey-bogart-of-motorcycles/#comments Sat, 13 Aug 2022 18:10:50 +0000 https://bmwwinddeflectors.com/vlog-25-wind-flaps-crack-heads-the-humphrey-bogart-of-motorcycles/ ]]> https://bmwwinddeflectors.com/vlog-25-wind-flaps-crack-heads-the-humphrey-bogart-of-motorcycles/feed/ 0 https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2014/ https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2014/#comments Sun, 07 Nov 2021 19:13:00 +0000 http://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2014/










Subscribe to our newsletter to get all the latest news and exclusive offers. Chain and Sprocket Kits. DC / AFAM Chains & Sprockets. Ilmberger GLOSS Carbon Fibre Wind Deflectors Flaps BMW R1200GS LC Adventure 2014. Brand New Genuine Ilmberger Carbon Fibre. Ilmberger Carbon parts are manufactured to the highest standards from 100% real carbon fibre, exclusively using the market-leading pre-impregnated autoclave process. All parts are extensively field and laboratory tested. The attention to detail ensures durability, strength, resistance and fit. This process allows Ilmberger Carbon to manufacture parts to the same level as those supplied to top-level teams in Formula 1 and MotoGP. Each gloss accessory carries a superior clear lacquer coating which provides outstanding depth and finish, alongside exceptional resistance against aging, weathering and UV radiation. Matt parts are further specially buffed to remove the shine, yet retain the same protection. This unique process allows all street parts to be supplied with ABE/TUV approval – this does not extend to racing parts. Ilmberger Carbon parts are market-leading aftermarket carbon products ready to fit to your motorcycle! Precision manufacturing techniques ensure a stunning visual finish, reduced weight, increased strength and exceptional fit! How are Ilmberger Carbon parts made? Ilmberger carbon parts are produced in the autoclave from Prepreg carbon weave. The carbon fibre is processed dry and usually laid in fully milled aluminium moulds, then packed in vacuum bags. In the next step, the parts are kept under constant vacuum within the bag and exposed to additional external pressure while being baked in the autoclave for several hours. In addition, the temperature is raised or lowered several times, depending on which fibres are being treated. Following the heating process, the parts are de-moulded and milled and sharpened in the water jet cutter or the 5 axle milling machine. Then, in the final step, the practically finished carbon parts are covered with a clear plastic coating. What is Prepreg weave? Prepreg weave is a pre-impregnated carbon weave that has been treated with binding agents before processing. Are Ilmberger carbon parts pre-drilled? Ilmberger supply ready-to-assemble carbon parts that are not only pre-drilled but ready to fit. And at Ilmberger Carbonparts we make sure its a perfect fit. What advantages do autoclave carbon parts have? Autoclave parts are much more stable than the so-called wet laminate parts. They can be varnished easily on account of their sealed surfaces, during precision processing there are no excess components present, such as, for example, excess resin, making the parts significantly lighter than standard carbon parts which are not autoclave baked. Is it legally permissible to fit carbon parts to street vehicles? Yes, for UK customers. Non-UK customers may need to register in the vehicle registration documentation or could obtain an Ilmberger ABE (general operating licence). Is the weight difference noticeable when compared to the plastic parts on a motorcycle? Depending on the amount used and the model of motorcycle in question, it is possible to reduce the overall weight by a number of kilos, and the perceptible difference should not be underestimated. The number of kilos on can reduce automobile weight by is often in the 2-digit range. Which weight advantages does autoclave carbon offer when compared to GRP/GFK? As well as the excellent optics the carbon possesses, cladding made from carbon is much more stable in the event of a crash than GRP/GFK, they do not suffer from wear and tear as much as GFK parts, and they do not break as easily as GFK parts, thereby assuring better protection for the underlying components. Are the parts supplied painted, or with decals? All Ilmberger parts are manufactured as plain carbon fibre. Some pictures shown may include OEM decals, or custom paint. This is only for part illustration purposes. What is the difference between regular gloss or matt road parts and racing parts? Ilmberger manufacture regular “road” parts which are finished to the highest possible standards. They also offer a “race” range – these parts are cheaper for track bikes, but do not meet the same standard of finish as the road parts. Race parts do not have UV protection or as many layers of lacquer, and many are supplied without additional styling cut-outs (EG bellypans). Race parts are NOT TUV approved. In most cases, Ilmberger supply there parts as a direct replacement. These usually reuse the original fittings. However, there are instances where original fittings cannot be reused; Ilmberger will provide these parts. Will these match my Ducati Performance Carbon? All Ilmberger Carbonparts come in matt finish for Ducati models – such as the original Ducati Performance Carbonparts do. They are a perfect match! Is a Gloss part available in the Matt finish (or vice versa)? Ilmberger do not offer both Gloss and Matt finish options for each model, it is usually one or the other. However, where one finish is offered, it is possible to order the other as a “special-order”. There are a few things to be aware of though… This would be “special order” only. This means manufactured specially for you and is non-cancellable or returnable! Lead-times are likely to be in excess of 12 weeks! All “special-order” parts incur a surcharge. Established in 1999, Performance Parts Ltd are the UKs leading high performance motorcycle component wholesale distribution company. It is not by accident that many top racing teams use the same products that we distribute. All of our products are tough tested and evaluated before they make it into our portfolio. Very often this can mean that there are cheaper alternatives to our brands, but there is usually a very good reason why! We summarise this situation by using the phrase The quality remains long after the price is forgotten. Please note that not all products advertised are in stock at all times. Many sell out, and some are manufactured to order. This provides all required information to process any order effectively without delay. We can offer 0% finance on certain promotional items. Should you wish to apply for this, you will need to call our sales office. Incorrectly supplied / damaged parts. It is the responsibility of the recipient to send the goods back to Performance Parts Ltd. To ensure acceptance, please return parts in unmarked original packing surrounded by an outer carton. Return goods in the condition that you would be satisfied to receive them in. Incorrectly ordered / unwanted parts. In all cases, acceptance of a parts return request shall be at the discretion of PPL Management. Please return parts in unmarked original packing surrounded by an outer carton. IF THERE IS A QUERY ON FITTING THE PRODUCT DO NOT RUN THE ENGINE OR USE THE PRODUCT, to do so will mean that the product is used and therefore it has been accepted as fit for its purpose. Used products will not be accepted for return for alleged fitting problems. It is the responsibility of the recipient to send the goods back to Performance Parts Ltd and return carriage charges will be credited (to a value of our standard carriage charge), once the goods are inspected and passed for credit / replacement. Replacement parts / credits will only be issued once the goods have been received and inspected. Some products are supplied without instructions and it may be necessary for these to be fitted by a qualified technician. Therefore PPL will not accept responsibility for any problems caused by any end users inability to fit products distributed by us. Units 3-4, Broad March. Long March Industrial Estate. Ilmberger GLOSS Carbon Fibre Long Bellypan Engine Spoiler & Kit BMW S1000RR 2017. Ilmberger GLOSS Carbon Fibre Left Right Frame Covers Protectors BMW S1000RR 2015. Ilmberger GLOSS Carbon Fibre Rear Hugger Mudguard BMW R Nine T (ESA) Racer 2017. Ilmberger GLOSS Carbon Fibre Bellypan Fairing & Kit BMW S1000R Naked 2017. The item “Ilmberger GLOSS Carbon Fibre Wind Deflectors Flaps BMW R1200GS LC Adventure 2014″ is in sale since Monday, April 10, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Bodywork & Frame\Windscreen Connectors & Trim”. The seller is “ppl-1″ and is located in Daventry, Northants, GB. This item can be shipped worldwide.

• To Fit Make: BMW
• To Fit Model: R1200GS LC Adventure
• Part Manufacturer: Ilmberger
• Part Manufacturer Number: WAL.028.GS12L.K / WAR.027.G12L.K
• Brand: Ilmberger
• Manufacturer Part Number: WAL-028-GS12L-K / WAR-027-GS12L-K
• Reference OE/OEM Number: 46638528677 / 46638528678
• Other Part Number: WAL-028-GS12L-K / WAR-027-GS12L-K
• Colour: Carbon Fibre
• Country/Region of Manufacture: Germany
• Intended Use: Performance Part

]]> https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2014/feed/ 0 https://bmwwinddeflectors.com/spoiler-deflectors-for-wind-flaps-upper-bmw-k1600-b-ga-gt-gtl-gtle-2017/ https://bmwwinddeflectors.com/spoiler-deflectors-for-wind-flaps-upper-bmw-k1600-b-ga-gt-gtl-gtle-2017/#comments Mon, 27 Sep 2021 03:20:42 +0000 http://bmwwinddeflectors.com/spoiler-deflectors-for-wind-flaps-upper-bmw-k1600-b-ga-gt-gtl-gtle-2017/




“; –uxp-icon-information:url”data:image/svg+xml;utf-8. “; –uxp-icon-checkmark:url”data:image/svg+xml;utf-8. “; –uxp-icon-comment:url”data:image/svg+xml;utf-8. “; –uxp-icon-alert:url”data:image/svg+xml;utf-8. “; –uxp-icon-help:url”data:image/svg+xml;utf-8. “; –uxp-icon-star-outline:url”data:image/svg+xml;utf-8. “; –uxp-icon-link-arrow:url”data:image/svg+xml;utf-8. “; –uxp-icon-chevron-down:url”data:image/svg+xml;utf-8. “; –uxp-icon-window-new:url”data:image/svg+xml;utf-8. “; –uxp-icon-refresh:url”data:image/svg+xml;utf-8. “; –uxp-icon-ellipses:url”data:image/svg+xml;utf-8. “; –uxp-icon-clock:url”data:image/svg+xml;utf-8. “; –uxp-icon-delete:url”data:image/svg+xml;utf-8. “; –uxp-icon-minus:url”data:image/svg+xml;utf-8. “; –uxp-icon-ok:url”data:image/svg+xml;utf-8. “; –uxp-icon-chevron-dbl-left:url”data:image/svg+xml;utf-8. “; –uxp-icon-chevron-dbl-right:url”data:image/svg+xml;utf-8. “; –uxp-icon-chevron-left:url”data:image/svg+xml;utf-8. “; –uxp-icon-chevron-right:url”data:image/svg+xml;utf-8. “; –uxp-icon-plus:url”data:image/svg+xml;utf-8. “; –uxp-icon-search:url”data:image/svg+xml;utf-8. “; –uxp-icon-star:url”data:image/svg+xml;utf-8. “; –uxp-icon-chevron-up:url”data:image/svg+xml;utf-8. “; –uxp-icon-alarm2:url”data:image/svg+xml;utf-8. “; –uxp-icon-credit-card:url”data:image/svg+xml;utf-8. “; –uxp-icon-drop-right:url”data:image/svg+xml;utf-8. “; –uxp-icon-apps:url”data:image/svg+xml;utf-8. “; –uxp-icon-chevron-down-lt:url”data:image/svg+xml;utf-8. “; –uxp-icon-chevron-right-lt:url”data:image/svg+xml;utf-8. “; –uxp-icon-chevron-left-lt:url”data:image/svg+xml;utf-8. “; –uxp-icon-home:url”data:image/svg+xml;utf-8. “; –uxp-icon-user:url”data:image/svg+xml;utf-8. “; –uxp-icon-grid-horizontal:url”data:image/svg+xml;utf-8. “; –uxp-icon-cart:url”data:image/svg+xml;utf-8. “; –uxp-icon-add-fill:url”data:image/svg+xml;utf-8. “; –uxp-icon-alarm:url”data:image/svg+xml;utf-8. “; –uxp-icon-calendar:url”data:image/svg+xml;utf-8. “; –uxp-icon-camera:url”data:image/svg+xml;utf-8. “; –uxp-icon-chevron-up-lt:url”data:image/svg+xml;utf-8. “; –uxp-icon-clock-refresh:url”data:image/svg+xml;utf-8. “; –uxp-icon-copy:url”data:image/svg+xml;utf-8. “; –uxp-icon-currency:url”data:image/svg+xml;utf-8. “; –uxp-icon-delete-fill:url”data:image/svg+xml;utf-8. “; –uxp-icon-download:url”data:image/svg+xml;utf-8. “; –uxp-icon-eye-close:url”data:image/svg+xml;utf-8. “; –uxp-icon-eye:url”data:image/svg+xml;utf-8. “; –uxp-icon-forward-2:url”data:image/svg+xml;utf-8. “; –uxp-icon-gift:url”data:image/svg+xml;utf-8. “; –uxp-icon-lightbulb:url”data:image/svg+xml;utf-8. “; –uxp-icon-magnifying-glass:url”data:image/svg+xml;utf-8. “; –uxp-icon-package:url”data:image/svg+xml;utf-8. “; –uxp-icon-print:url”data:image/svg+xml;utf-8. “; –uxp-icon-remove:url”data:image/svg+xml;utf-8. “; –uxp-icon-revert:url”data:image/svg+xml;utf-8. “; –uxp-icon-sm-business:url”data:image/svg+xml;utf-8. “; –uxp-icon-truck:url”data:image/svg+xml;utf-8. “; –uxp-icon-video-camera:url”data:image/svg+xml;utf-8. “; –uxp-icon-window:url”data:image/svg+xml;utf-8. “; –uxp-icon-share:url”data:image/svg+xml;utf-8. “; –uxp-icon-align-center:url”data:image/svg+xml;utf-8. “; –uxp-icon-align-justify:url”data:image/svg+xml;utf-8. “; –uxp-icon-align-left:url”data:image/svg+xml;utf-8. “; –uxp-icon-align-right:url”data:image/svg+xml;utf-8. “; –uxp-icon-clear-formatting:url”data:image/svg+xml;utf-8. “; –uxp-icon-img-gallery:url”data:image/svg+xml;utf-8. “; –uxp-icon-indent-left:url”data:image/svg+xml;utf-8. “; –uxp-icon-indent-right:url”data:image/svg+xml;utf-8. “; –uxp-icon-magic:url”data:image/svg+xml;utf-8. “; –uxp-icon-paintbrush:url”data:image/svg+xml;utf-8. “; –uxp-icon-tag-end:url”data:image/svg+xml;utf-8. “; –uxp-icon-video:url”data:image/svg+xml;utf-8. “; –uxp-icon-drop-down:url”data:image/svg+xml;utf-8. “; –uxp-icon-drop-up:url”data:image/svg+xml;utf-8. “; –uxp-icon-drop-left:url”data:image/svg+xml;utf-8. “; –uxp-icon-trash:url”data:image/svg+xml;utf-8. “; –uxp-icon-gd-the-go:url”data:image/svg+xml;utf-8. “; –uxp-icon-locked:url”data:image/svg+xml;utf-8. “; –uxp-icon-img:url”data:image/svg+xml;utf-8. “; –uxp-icon-edit:url”data:image/svg+xml;utf-8. “; –uxp-icon-tools:url”data:image/svg+xml;utf-8. “; margin: 20px 0px 10px; font-family: “Helvetica Neue”, Helvetica, Arial, sans-serif; font-weight: 500; color: rgb(17, 17, 17); font-size: 36px; line-height: 1.1; background-color: rgb(255, 255, 255);”>. “; margin-top: 0rem; margin-bottom: 20px; font-family: “Helvetica Neue”, Helvetica, Arial, sans-serif; font-weight: 500; color: rgb(17, 17, 17); font-size: 18px; line-height: 1.6; background-color: rgb(255, 255, 255);”>For even more protection on your travels. “;”>The upper wind deflectors increase the area of the upper fairing and are a perfectly developed protection against wind and cold. “;”>The wind deflectors effectively divert the upcoming airflow around the upper arms and upper body. “;”>Made of sturdy acrylic glass optionally clean the wind deflectors are available in. “; font-weight: var(–uxp-font-weight-bold, bold);”>clear. “; font-weight: var(–uxp-font-weight-bold, bold);”>dark tinted color. “;”>The installation of the wind deflector is completed in a few moments and can be attached without any modifications. “; margin-top: 0rem; margin-bottom: 20px; font-family: “Helvetica Neue”, Helvetica, Arial, sans-serif; font-weight: 500; color: rgb(17, 17, 17); font-size: 18px; line-height: 1.6; background-color: rgb(255, 255, 255);”>Galvanized and powder-coated brackets ensure a secure hold. “;”>We deliver a set of wind deflectors for right and left. The item “Spoiler deflectors for wind flaps Upper BMW K1600 B GA GT GTL GTLE 2017″ is in sale since Friday, May 14, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “vespa_fun” and is located in Sarasota, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Manufacturer Part Number: SP8023FS
• Brand: ISO

]]> https://bmwwinddeflectors.com/spoiler-deflectors-for-wind-flaps-upper-bmw-k1600-b-ga-gt-gtl-gtle-2017/feed/ 0 https://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-r1250gs/ https://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-r1250gs/#comments Mon, 14 Jun 2021 10:05:42 +0000 http://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-r1250gs/


Ajouter cette boutique à mes favoris. Wunderlich Smoke wind flaps deflectors BMW R1250GS. Wunderlich wind flaps for BMW R1250GS (not ADV). Deflect airflow from driver hands to improve riding comfort. Made from Smoke plastic. The item “Wunderlich Smoke wind flaps deflectors BMW R1250GS” is in sale since Tuesday, September 3, 2019. This item is in the category “Auto, moto – pièces, accessoires\Moto\ tuning, styling\Autres”. The seller is “sdmoto_france” and is located in FR. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Marque: WUNDERLICH
• Numéro de pièce fabricant: 20520-202

]]> https://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-r1250gs/feed/ 0 https://bmwwinddeflectors.com/wunderlich-clear-wind-flaps-deflectors-bmw-s1000xr/ https://bmwwinddeflectors.com/wunderlich-clear-wind-flaps-deflectors-bmw-s1000xr/#comments Thu, 25 Feb 2021 21:05:40 +0000 http://bmwwinddeflectors.com/wunderlich-clear-wind-flaps-deflectors-bmw-s1000xr/


Ajouter cette boutique à mes favoris. Wunderlich Clear wind flaps deflectors BMW S1000XR. Wunderlich Clear wind flaps for BMW S1000XR. Deflect airflow from driver hands to improve riding comfort. Made from scratch proof plastic. The item “Wunderlich Clear wind flaps deflectors BMW S1000XR” is in sale since Thursday, March 23, 2017. This item is in the category “Auto, moto – pièces, accessoires\Moto\ tuning, styling\Autres”. The seller is “sdmoto_france” and is located in FR. This item can be shipped worldwide.

• Marque: WUNDERLICH
• Numéro de pièce fabricant: 44830-005

]]> https://bmwwinddeflectors.com/wunderlich-clear-wind-flaps-deflectors-bmw-s1000xr/feed/ 0 https://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-s1000xr-19/ https://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-s1000xr-19/#comments Wed, 24 Feb 2021 20:54:39 +0000 http://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-s1000xr-19/


Ajouter cette boutique à mes favoris. Wunderlich Smoke wind flaps deflectors BMW S1000XR -19. Wunderlich Smoke wind flaps for BMW S1000XR up to 2019. Deflect airflow from driver hands to improve riding comfort. Made from scratch proof plastic. The item “Wunderlich Smoke wind flaps deflectors BMW S1000XR -19″ is in sale since Monday, May 21, 2018. This item is in the category “Auto, moto – pièces, accessoires\Moto\ tuning, styling\Autres”. The seller is “sdmoto_france” and is located in FR. This item can be shipped worldwide.

• Marque: WUNDERLICH
• Numéro de pièce fabricant: 44830-006

]]> https://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-s1000xr-19/feed/ 0 https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2017/ https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2017/#comments Mon, 23 Dec 2019 14:54:45 +0000 http://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2017/










Subscribe to our newsletter to get all the latest news and exclusive offers. Ilmberger GLOSS Carbon Fibre Wind Deflectors Flaps BMW R1200GS LC Adventure 2017. Brand New Genuine Ilmberger Carbon Fibre. Ilmberger Carbon parts are manufactured to the highest standards from 100% real carbon fibre, exclusively using the market-leading pre-impregnated autoclave process. All parts are extensively field and laboratory tested. The attention to detail ensures durability, strength, resistance and fit. This process allows Ilmberger Carbon to manufacture parts to the same level as those supplied to top-level teams in Formula 1 and MotoGP. Each gloss accessory carries a superior clear lacquer coating which provides outstanding depth and finish, alongside exceptional resistance against aging, weathering and UV radiation. Matt parts are further specially buffed to remove the shine, yet retain the same protection. This unique process allows all street parts to be supplied with ABE/TUV approval – this does not extend to racing parts. Ilmberger Carbon parts are market-leading aftermarket carbon products ready to fit to your motorcycle! Precision manufacturing techniques ensure a stunning visual finish, reduced weight, increased strength and exceptional fit! How are Ilmberger Carbon parts made? Ilmberger carbon parts are produced in the autoclave from Prepreg carbon weave. The carbon fibre is processed dry and usually laid in fully milled aluminium moulds, then packed in vacuum bags. In the next step, the parts are kept under constant vacuum within the bag and exposed to additional external pressure while being baked in the autoclave for several hours. In addition, the temperature is raised or lowered several times, depending on which fibres are being treated. Following the heating process, the parts are de-moulded and milled and sharpened in the water jet cutter or the 5 axle milling machine. Then, in the final step, the practically finished carbon parts are covered with a clear plastic coating. What is Prepreg weave? Prepreg weave is a pre-impregnated carbon weave that has been treated with binding agents before processing. Are Ilmberger carbon parts pre-drilled? Ilmberger supply ready-to-assemble carbon parts that are not only pre-drilled but ready to fit. And at Ilmberger Carbonparts we make sure its a perfect fit. What advantages do autoclave carbon parts have? Autoclave parts are much more stable than the so-called wet laminate parts. They can be varnished easily on account of their sealed surfaces, during precision processing there are no excess components present, such as, for example, excess resin, making the parts significantly lighter than standard carbon parts which are not autoclave baked. Is it legally permissible to fit carbon parts to street vehicles? Yes, for UK customers. Non-UK customers may need to register in the vehicle registration documentation or could obtain an Ilmberger ABE (general operating licence). Is the weight difference noticeable when compared to the plastic parts on a motorcycle? Depending on the amount used and the model of motorcycle in question, it is possible to reduce the overall weight by a number of kilos, and the perceptible difference should not be underestimated. The number of kilos on can reduce automobile weight by is often in the 2-digit range. Which weight advantages does autoclave carbon offer when compared to GRP/GFK? As well as the excellent optics the carbon possesses, cladding made from carbon is much more stable in the event of a crash than GRP/GFK, they do not suffer from wear and tear as much as GFK parts, and they do not break as easily as GFK parts, thereby assuring better protection for the underlying components. Are the parts supplied painted, or with decals? All Ilmberger parts are manufactured as plain carbon fibre. Some pictures shown may include OEM decals, or custom paint. This is only for part illustration purposes. What is the difference between regular gloss or matt road parts and racing parts? Ilmberger manufacture regular “road” parts which are finished to the highest possible standards. They also offer a “race” range – these parts are cheaper for track bikes, but do not meet the same standard of finish as the road parts. Race parts do not have UV protection or as many layers of lacquer, and many are supplied without additional styling cut-outs (EG bellypans). Race parts are NOT TUV approved. In most cases, Ilmberger supply there parts as a direct replacement. These usually reuse the original fittings. However, there are instances where original fittings cannot be reused; Ilmberger will provide these parts. Will these match my Ducati Performance Carbon? All Ilmberger Carbonparts come in matt finish for Ducati models – such as the original Ducati Performance Carbonparts do. They are a perfect match! Is a Gloss part available in the Matt finish (or vice versa)? Ilmberger do not offer both Gloss and Matt finish options for each model, it is usually one or the other. However, where one finish is offered, it is possible to order the other as a “special-order”. There are a few things to be aware of though… This would be “special order” only. This means manufactured specially for you and is non-cancellable or returnable! Lead-times are likely to be in excess of 12 weeks! All “special-order” parts incur a surcharge. Established in 1999, Performance Parts Ltd are the UKs leading high performance motorcycle component wholesale distribution company. It is not by accident that many top racing teams use the same products that we distribute. All of our products are tough tested and evaluated before they make it into our portfolio. Very often this can mean that there are cheaper alternatives to our brands, but there is usually a very good reason why! We summarise this situation by using the phrase The quality remains long after the price is forgotten. Please note that not all products advertised are in stock at all times. Many sell out, and some are manufactured to order. This provides all required information to process any order effectively without delay. We can offer 0% finance on certain promotional items. Should you wish to apply for this, you will need to call our sales office. Incorrectly supplied / damaged parts. It is the responsibility of the recipient to send the goods back to Performance Parts Ltd. To ensure acceptance, please return parts in unmarked original packing surrounded by an outer carton. Return goods in the condition that you would be satisfied to receive them in. Incorrectly ordered / unwanted parts. In all cases, acceptance of a parts return request shall be at the discretion of PPL Management. Please return parts in unmarked original packing surrounded by an outer carton. IF THERE IS A QUERY ON FITTING THE PRODUCT DO NOT RUN THE ENGINE OR USE THE PRODUCT, to do so will mean that the product is used and therefore it has been accepted as fit for its purpose. Used products will not be accepted for return for alleged fitting problems. It is the responsibility of the recipient to send the goods back to Performance Parts Ltd and return carriage charges will be credited (to a value of our standard carriage charge), once the goods are inspected and passed for credit / replacement. Replacement parts / credits will only be issued once the goods have been received and inspected. Some products are supplied without instructions and it may be necessary for these to be fitted by a qualified technician. Therefore PPL will not accept responsibility for any problems caused by any end users inability to fit products distributed by us. Units 3-4, Broad March. Long March Industrial Estate. Ilmberger GLOSS Carbon Fibre Long Bellypan Engine Spoiler & Kit BMW S1000RR 2017. Ilmberger GLOSS Carbon Fibre Front Centre Piece Air Intake Duct BMW S1000RR 2015. Ilmberger GLOSS Carbon Fibre Bellypan Fairing & Kit BMW S1000R Naked 2017. Ilmberger GLOSS Carbon Fibre Rear Seat Light Cover Panel BMW S1000RR 2017. The item “Ilmberger GLOSS Carbon Fibre Wind Deflectors Flaps BMW R1200GS LC Adventure 2017″ is in sale since Tuesday, September 19, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Bodywork & Frame\Windscreen Connectors & Trim”. The seller is “ppl-1″ and is located in Daventry, Northants, GB. This item can be shipped worldwide.

• To Fit Make: BMW
• To Fit Model: R1200GS LC Adventure
• Part Manufacturer: Ilmberger
• Part Manufacturer Number: WAL.028.GS12L.K / WAR.027.G12L.K
• Brand: Ilmberger
• Manufacturer Part Number: WAL-028-GS12L-K / WAR-027-GS12L-K
• Reference OE/OEM Number: 46638528677 / 46638528678
• Other Part Number: WAL-028-GS12L-K / WAR-027-GS12L-K
• Colour: Carbon Fibre
• Country/Region of Manufacture: Germany
• Intended Use: Performance Part

]]> https://bmwwinddeflectors.com/ilmberger-gloss-carbon-fibre-wind-deflectors-flaps-bmw-r1200gs-lc-adventure-2017/feed/ 0 https://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-s1000xr-2/ https://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-s1000xr-2/#comments Tue, 12 Dec 2017 08:10:17 +0000 http://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-s1000xr-2/


Ajouter cette boutique à mes favoris. Wunderlich Smoke wind flaps deflectors BMW S1000XR. Wunderlich Smoke wind flaps for BMW S1000XR. Deflect airflow from driver hands to improve riding comfort. Made from scratch proof plastic. The item “Wunderlich Smoke wind flaps deflectors BMW S1000XR” is in sale since Tuesday, August 01, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Bodywork & Frame\Windscreens”. The seller is “sdmoto_france” and is located in Candillargues. This item can be shipped to United Kingdom, North, South, or Latin America, all countries in continental Asia, Australia.

• Brand: WUNDERLICH
• Manufacturer Part Number: 44830-006

]]> https://bmwwinddeflectors.com/wunderlich-smoke-wind-flaps-deflectors-bmw-s1000xr-2/feed/ 0